elmeg modules for elmeg systems
Module VoIP-VPN Gateway  | Extension of elmeg ICT Family The VoIP-VPN Gateway module is the ideal supplement to the elmeg ICT systems. The module combines modern Internet telephony via Voice over IP (VoIP) with the secure data exchange over VPN. 2 slots for the extension modules M 4 DSP or M 8 DSP are integrated into the module. They additionally provide the VoIP-VPN gateway with digital, highly compressed voice channels for transition into the PSTN. The VoIP/VPN gateway can also be integrated subsequently into existing elmeg ICT systems. An elmeg ICT unit which is equipped with the VoIP-VPN gateway is able to provide all basic network services and is, therefore, converted into a communications centre. In this case, the unit works as DHCP server, assigns IP addresses to all computers in the network and refers to the correct DHCP servers and gateways to the Internet. The Internet access as such is also provided by the PBX.
|
 | Extension of module VoIP-VPN Gateway for elmeg ICT Family / elmeg T444 The extension modules M 4 DSP and M 8 DSP convert the VoIP-VPN Gateway module into a complete switched network-to-IP gateway. This permits the transition of IP voice data into the traditional voice network and vice versa. To provide optimum voice quality with minimum bandwidths, the standard voice codecs G.711, G.723.1, G.726, and G.729a/b are supported.
|
Modul Router ICT  | Extension for elmeg ICT Family Integration of xDSL/ISDN data communication into your PSTN communication. Fast and secure connections to the Internet and connections for data transfer are provided via the router module for your complete corporate network. The router functions are centrally configured: ISDN fallback after failure of the xDSL connection, central firewall, setup of connections upon request and setup of permanent connections and many other functions.
|
elmeg Module elmeg DECT multicell 2 / DECT multicell 4  | Extension for elmeg ICT Family As DECT controllers, these modules are part of the elmeg DECT400 solution for the elmeg ICT systems. They offer the option to connect 2 or 4 elmeg DECT rfps. Each rfp provides up to 4 voice channels simultaneously.
|
elmeg Module 2 POTS / Module 4 POTS  | Extension for elmeg ICT Family POTS (Plain Old Telephone Service) offers analogue, standard telephone lines. The POTS modules serve to integrate existing analogue telephone lines into the IT telecommunications systems of the elmeg ICT series. A typical field of application is the integration of an existing trunk for a fax machine, which cannot be used at the ISDN access.
|
Modul 2 POTS V.2 | Modul 4 POTS V.2  | Extension for elmeg T484 POTS (Plain Old Telephone Service) offers analogue, standard telephone lines. The POTS modules serve to integrate existing analogue telephone lines into the IT telecommunications systems of the elmeg T484. A typical field of application is the integration of an existing trunk for a fax machine, which cannot be used at the ISDN access.
|
elmeg Module PRI  | Extension for elmeg ICT Family This module offers the connection of the IT telecommunications system to a PRI primary multiplexing access. A 4-wire cable simultaneously provides 30 digital trunks. This is a solution which also satisfies the demands of large scale corporate networks with extremely high communication capacity, such as call centres.
|
elmeg Module 4 Up0 / Module 8 Up0  | Extension for elmeg ICT Family Interfaces with ISDN features provided via a 2-wire cable connection (legacy installation) and a range of up to 1000 meters. Connection to ISDN end devices in combination with Up0/BRI converter or integrated into elmeg CS290-U and elmeg CS410-U.
|
elmeg Module 2 BRI / Module 4 BRI  | Extension for elmeg ICT Family / elmeg T484 For 2 or 4 additional BRIs each for the connection of ISDN telephone sets or ISDN PC cards. For each module, 1 BRI can be configured as external trunk (PtP and PtMP). All BRIs can be used to connect elmeg system telephones.
|
elmeg Module 4a/b / Module 8 a/b  | Extension for elmeg ICT Family / elmeg T484 For 4 or 8 further analogue PBXs, such as (mobile) phones, fax group 3, call answering machine, external voice-mail, or modem. All a/b port with CLIP support and call charge pulse.
|
elmeg Module FSM  | Extension for elmeg ICT Family / elmeg T484 The fine protection modules serve to protect the accesses of the PBX against over-voltage. The over-voltage occurring on the lines will be grounded in the process.
|
Module TFE | Extension of elmeg ICT Family / elmeg T484 The module TFE offers the connection of a door intercom (FTZ 123D12 or 4 wire circuit)
|
elmeg Module Contacts  | Extension for elmeg ICT Family / elmeg T484 6 sensor inputs and 3 switch contacts connect the most diverse technical devices (e.g. heating, alarm system, proximity switch or short circuit contact in the case of water ingress) with automatic initiation of calls, signal transmission, etc.
|
elmeg Module NSP  | Extension for elmeg ICT Family For the emergency power supply for an ISDN capable systems telephone, e.g. elmeg CS400xt, at an internal BRI bus (the external BRI is passed though). This option serves to ensure availability even in the case of a power failure.
|
elmeg Module 1 POTS  | Extension for elmeg T240 / T444 This module extends the IT telecommunications systems T240 and elmeg T444 by an analogue trunk (POTS = Plain Old Telephone Service). This option serves, for instance, to connect an existing analogue fax line to your PBX in addition to the external ISDN access.
|
elmeg Module 2 a/b  | Extension for elmeg T240 / T444 This module extends the T240 and elmeg T444 IT telecommunications systems by 2 internal, analogue connections. It serves to connect up to 6 analogue end devices with CLIP and call charge pulse to these PBX systems.
|
elmeg T400  | Comfortable extension of keys for elmeg CS410, CS410-U, and IP-S400 20 function keys can be programmed on 2 levels and are equipped with an LED for level 1. Employees of the company can be reached by pressing a key. An LED shows the status of the subscriber. Telephone lines can be assigned a key for the purpose of alternation between lines. The functions of the PBX can also be controlled via keys.
|
T400 / 2 | Comfortable extension of keys for elmeg CS410, CS410-U, and IP-S400 10 function keys can be programmed on 2 levels and are equipped with an LED for level 1. Employees of the company can be reached by pressing a key. An LED shows the status of the subscriber. Telephone lines can be assigned a key for the purpose of alternation between lines. The functions of the PBX can also be controlled via keys.
|
elmeg Call Answering Machine Module  | Extension for elmeg CS410 / CS410-U The call answering machine module offers a recording time of up to 48 minutes and comfortable operation via the soft keys of the graphics display. A special highlight is the option to provide proper call answering functions for a second system telephone via a virtual voice box, including display and control via the function keys on the remote telephone set.
|