Dual Band Patch Antenna, 13,5+15,5dBi, N jack
This antenna is a component of an antenna solution for 2.4 GHz and 5 GHz point-to-point connections for coupling sites via WLAN. Due to its special characteristics, it can be used in either of the two frequency bands by merely switching the frequency at the Wx000 or the WI series. This means that the user can freely select the frequency band he or she prefers, e.g. if there are interfering applications in the 2.4 GHz band. The antenna is small and light and thus suitable for smaller distances of approx. 0.5 to 1 km, depending on the desired data rate and frequency band.

22 dBi Dish Antenna, 2,4GHz, N jack
This 2.4 GHz antenna is suitable for directional links. It has a gain of 22 dBi and a beam angle of 13.8°, which permits targeted transmission. At the full transmission rate of 54 Mbps, up to 1km can be covered, and at a rate of 6 Mbps, up to approximately 12 km (if an identical antenna is used on the opposite side, with overvoltage protector and 5 m cable). This antenna also allows good ranges when used with 20 m cable, e.g. if mounted on a higher mast. It has an N jack and can thus be connected to devices of the Wx000 series or the WI series using the particularly low-loss cables of our solutions.

23dBi Patch Antenna, 5Ghz, N jack
This 5 GHz antenna is suitable for directional links. It has a gain of 23 dBi and a beam angle of 9°, which permits targeted transmission. At the full transmission rate of 54 Mbps, up to 600 m can be covered, and at a rate of 6 Mbps, up to approximately 7 km (if an identical antenna is used on the opposite side, with overvoltage protector and 5 m cable). Due to its compact and flat shape, it is unobtrusive and easy-to-mount. The antenna has an N jack and can thus be connected to devices of the Wx000 series or the WI series using the particularly low-loss cables of our solutions.

Surge protector
This overvoltage protector is used to largely prevent overvoltages from the outside from harming the electronics and the network, e.g. in the case of a thunderstorm. It is designed for up to 6 GHz and can therefore easily be used for systems from 2 GHz to 5 GHz. With its N plug and N jack, it can be placed between the RTNC-N cable and other N cables. The overvoltage protector should be mounted at the transition point to the building and must be sufficiently earthed.
Insertion loss: 0.4 dB at 2.4 GHz, 0.7 dB at 5.5 GHz

This antenna is a replacement standard antenna for older ComPoints with TNC connector. It is swivel-mounted and can easily be adjusted to the desired position. New devices, such as Wx000, Wi-Serie, ComPoint Enterprise and the –HI and –HO variants of ComPoint Industrial have RTNC connectors and require the antenna 600408.

This antenna is a replacement standard antenna for devices with RTNC connector, such as Wx000, Wi-Serie, ComPoint Enterprise and the –HI and –HO variants of ComPoint Industrial. It is swivel-mounted and can easily be adjusted to the desired position. Older devices have TNC connectors and require the antenna 600130.

This antenna is a replacement standard antenna for devices with RSMA connector, such as the W500 or the Butterfly. It is swivel-mounted and can easily be adjusted to the desired position

This antenna features omnidirectional radiation and has a gain of 4 dBi. The antenna is equipped with an N jack and always requires an adapter cable from N to RTNC or RSMA, depending on the device to which it is connected. Due to its special characteristics, it can be used in either of the two frequency bands by merely switching the frequency at the Wx000. This means that the user can freely select the frequency band he or she prefers, e.g. if there are interfering applications in the 2.4 GHz band. It can be used in suspended ceilings and is thus suitable for unobtrusive WLAN supply within buildings. It comes with two screws and anchors for fixation.

This antenna enhances the wireless link of remote desktop PCs. The antenna can be placed on the PC or desk and is connected with its cable to the PCI card. It can thus be positioned flexibly in order to optimize the link quality. This antenna can also be used with other devices that have an RSMA connector, such as the W500 or the Butterfly.

This antenna features omnidirectional radiation and has a gain of 5 dBi. The antenna is equipped with a cable length of 1.2 m and can thus be positioned at some distance from the access point in order to improve the transmission and reception properties and to make optimum use of the antenna diversity. If the 1.2 m cable is not long enough, it can be extended with optionally available RTNC cables. With the help of an adapter to RSMA, this antenna can also be operated at devices with RSMA jack. This antenna is waterproof and can therefore be used both indoors and outdoors, e.g. to service an outdoor area. The scope of delivery includes mounting kits for wall, mast, and window mounting.

This antenna features omnidirectional radiation and has a gain of 5 dBi. It is particularly suitable for vehicle mounting. Using its 1.2 m cable, it can be connected directly. If required, the cable can be extended with optionally available RTNC cables. With the help of an adapter to RSMA, this antenna can also be operated at devices with RSMA jack. For optimum operation, this antenna requires a metallic surface of at least 40 cm x 40 cm, such as a vehicle roof. This antenna is waterproof and can therefore be used both indoors and outdoors.

Patch antenna for outdoor use, especially for WLAN bridges. A swivel mounting kit for this antenna can be ordered separately (No.: 600298). This antenna requires the adapter 600406 (to RTNC) or 600395 (to RSMA).

Patch antenna for indoor and outdoor use, especially for WLANs. Circular-polarized antennas are used in areas with many reflections, such as warehouses or production halls and over water surfaces. A swivel mounting kit for this antenna can be ordered separately (No.: 600298). This antenna requires the adapter 600406 (to RTNC) or 600395 (to RSMA).

This dual-band antenna is mainly suited for indoors and directional links. It can be used e.g. for corridors, tunnels or outdoor links of up to a few hundred meters. It is very small and light and can mounted on walls, masts, and glass surfaces, such as windows, using various mounting materials. At the full transmission rate of 54 Mbps, up to 100 m can be covered in the 5 GHz frequency band, and 500 m using the 2.4 GHz band, (if an identical antenna is used on the opposite side, with overvoltage protector and 1 m cable). At lower data rates, distances of up to 1 km can be covered. Due to its special characteristics, it can be used in either of the two frequency bands by merely switching the frequency at the Wx000. This means that the user can freely select the frequency band he or she prefers, e.g. if there are interfering applications in the 2.4 GHz band. The antenna has an SMA jack and a 20 cm adapter cable from SMA to RTNC. It can thus be connected to a Wx000 or the WI series and operated next to this device. Alternatively, extensions and adapters for other devices with RSMA connector (e.g. W500, Butterfly) are available.

This antenna is an outdoor Antenna for 2.4 GHz. The antenna is suitable for smaller distances up to several hundred meters, depending on the desired data rate. It must be used with the over voltage protector ACC-EMP-N-dual, Order No.: 600499.