Kategorie: Internetzugang
Internetzugang über 'Internet by CompuServe'
Hinweise zur Konfiguration eines Internetzugangs über "Internet by CompuServe" am Beispiel eines BinTec-Routers X1200
Vorbemerkungen
Die Konfiguration des X1200 für "Internet by CompuServe" unterscheidet sich von der klassischen Zugangsart "CompuServe Classic", bei der als Encapsulation "Async PPP over X.75" verwendet wird (vergleiche Benutzerhandbuch X1200).
Merkmale von "Internet by CompuServe":
Merkmale von "Internet by CompuServe":
- Die Einwahlnummernn sind 019160 bzw. 01033019160
- Die Tarife heißen "CompuServe Office" und "CompuServe Pro"
- Eine Registrierung bzw. Anmeldung ist erforderlich
Hinweise zur Konfiguration des BinTec-Routers X1200
Unter der Service-Rufnummer von CompuServe war folgendes zu erfahren:
Im Beispiel ist der Verbindungsaufbau eines X1200 mit Image Version 5.3.1 Patch 6 zu sehen (mit Image 6.1.2 kam die Verbindung zum Einwahlserver nicht zustande).
Der erfolgreiche Verbindungsaufbau am Beispiel eines X1200 mit Image Version 5.3.1 Patch 6:
- Für den Internetzugang wird standardmäßiges PPP verwendet
- Kanalbündelung ist nicht möglich
- Datenkompression ist auszuschalten
Im Beispiel ist der Verbindungsaufbau eines X1200 mit Image Version 5.3.1 Patch 6 zu sehen (mit Image 6.1.2 kam die Verbindung zum Einwahlserver nicht zustande).
Der erfolgreiche Verbindungsaufbau am Beispiel eines X1200 mit Image Version 5.3.1 Patch 6:
x1200:> debug all&
x1200:> ping -c15 62.146.2.97
PING 62.146.2.97: 64 data bytes
10:27:03 INFO/INET: dialup if 10002 prot 1 172.179.176.223:2048->62.146.2.97:22297
10:27:04 DEBUG/PPP: CSpro: dial number <0019160>
10:27:04 DEBUG/ISDN: stack 0: activate
10:27:06 DEBUG/PPP: B channel layer 1 protocol hdlc, 64000 bit/sec
10:27:07 INFO/PPP: CSpro: LCP establishment failure
10:27:07 INFO/PPP: interface CSpro is blocked for 10 seconds
10:27:07 DEBUG/PPP: CSpro: outgoing connection established
10:27:07 INFO/PPP: CSpro: local IP address is 172.178.37.156, remote is 195.71.179.104
10:27:07 DEBUG/INET: NAT: new outgoing session on ifc 10002 prot 1 172.178.37.156:6/172.178.37.156:32770 -> 62.146.2.97:0
64 bytes from 62.146.2.97: icmp_seq=4. time=56. ms
64 bytes from 62.146.2.97: icmp_seq=5. time=55. ms
...
64 bytes from 62.146.2.97: icmp_seq=14. time=55. ms
----62.146.2.97 PING Statistics----
15 packets transmitted, 11 packets received, 26% packet loss
round-trip (ms) min/avg/max = 47/53/56
x1200:>
x1200:> ping -c15 62.146.2.97
PING 62.146.2.97: 64 data bytes
10:27:03 INFO/INET: dialup if 10002 prot 1 172.179.176.223:2048->62.146.2.97:22297
10:27:04 DEBUG/PPP: CSpro: dial number <0019160>
10:27:04 DEBUG/ISDN: stack 0: activate
10:27:06 DEBUG/PPP: B channel layer 1 protocol hdlc, 64000 bit/sec
10:27:07 INFO/PPP: CSpro: LCP establishment failure
10:27:07 INFO/PPP: interface CSpro is blocked for 10 seconds
10:27:07 DEBUG/PPP: CSpro: outgoing connection established
10:27:07 INFO/PPP: CSpro: local IP address is 172.178.37.156, remote is 195.71.179.104
10:27:07 DEBUG/INET: NAT: new outgoing session on ifc 10002 prot 1 172.178.37.156:6/172.178.37.156:32770 -> 62.146.2.97:0
64 bytes from 62.146.2.97: icmp_seq=4. time=56. ms
64 bytes from 62.146.2.97: icmp_seq=5. time=55. ms
...
64 bytes from 62.146.2.97: icmp_seq=14. time=55. ms
----62.146.2.97 PING Statistics----
15 packets transmitted, 11 packets received, 26% packet loss
round-trip (ms) min/avg/max = 47/53/56
x1200:>









